Introduction
We built this 640mm, 2600W carbon fiber heating lamp for one reason: to slip right into industrial machines that need fast, steady infrared heat—no fuss, no redesign. It’s for the hot zones where you need a lot of power in a small space, like heating plastic, curing coatings, or drying parts.
Power, Voltage, and Size—Why It Matters
The core is simple: 2600W packed into a 640mm tube. That length-to-power ratio gives you serious watt density, so the heat stays concentrated where you want it instead of spreading out. It runs on high voltage, which keeps the current lower for the same power. Lower current means you can use smaller wiring, and you get less voltage drop over long runs. In practice? The heat stays stable right where you need it, even if the line is long. And the 640mm length? It was chosen to fit standard machine spaces. Mounting is straightforward, alignment is easier, and shielding makes sense. The heat distribution along the tube stays predictable, so your process stays consistent—day after day.
What’s Inside: Carbon Fiber + R7s Connectors
Inside, you’ve got a carbon fiber filament. It responds quickly and holds steady even when you’re cycling the heat on and off. That means fast warm-up and dependable output. The filament sits in a halogen-filled quartz envelope. The halogen cycle helps keep the inside clean by returning material back to the filament, so the light output stays consistent over time. Then there’s the R7s connector. It’s double-ended, built for high current, and gives you solid mechanical support. Wiring is clean and simple, and mounting is repeatable. If your system already uses R7s, this lamp is meant to drop in and get to work.
Real-World Use: Fast Heat, With a Few Realities
Use this when you need rapid, focused infrared heat in a tight area. It warms up fast and holds temperature well, which can help you shorten cycle times and tighten up your process tolerances. The watt density is perfect for heating plastics, curing coatings, and drying components. But here’s the reality check: that kind of power packed into 640mm means the surrounding parts feel more heat. You’ll want to plan for proper airflow, shielding, and some thermal standoff distance. If you size your cooling and mounting with that in mind, the lamp will run reliably on the shop floor—predictable, serviceable, and ready for the next run.